T-VER-E50B2 Medidor de Energía y Potencia HOBO-Veris

T-VER-E50B2

Onset

Nuevo

Grupo 3

Medidor de Potencia y Energía

880,00 €

sin IVA

El Medidor de Potencia y Energía E50B2 combina unas prestaciones excepcionales con una fácil instalación para proveer una solución a un costo accesible para aplicaciones de monitorización de potencia y energía. El T-VER-E50B2 puede instalarse sobre carriles DIN standard o sobre superficie plana. Funciona con los Registradores HOBO UX, U30, ZW, H22 & H21.

Características:
  • Mide Factor de Potencia (PF), Potencia Reactiva (VAR), Vatios Hora (Wh) y más.
  • Rango: 90-600VAC – configuraciones 'Y' ó Delta
  • Precisión: Precisión ANSI 12.20 0.5%, IEC 62053-22 Clase 0.5S
  • Compatible con CTs desde 5 a 32000A (salida de 333mV) 
  • LCD iluminado para una lectura clara
  • Listado en UL, CE, California CSI Solar, ANSI C12.20
Entorno:
El Sensor T-VER-E50B2 se utiliza en entornos de Interior
Medidas:
El Sensor T-VER-E50B2 soporta las siguentes medidas:
Corriente Alterna AC,
Voltaje AC
Amperios/hora (Ah)
Amperios (A)
Eventos
Kilovatios/hora (kWh)
Kilovatios (kW)
Factor de Potencia (PF)
Potencia Reactiva (VAR)
Hora Voltios-Amperios Reactivos (VARh)
Voltios-Amperios (VA)
Voltios (V)
Vatios/hora (Wh)
Vatios (W)
 
Otros modelos disponibles (los precios varían):
E50B1 DIN Energy Meter, VAR Pulse Out
E50C2 DIN Energy Meter, Modbus, Pulse Out
E50C3 DIN Energy Meter, Modbus, Logging, Pulse Out
E50H5 DIN Energy Meter, BACnet, Logging, Pulse In
E51C2 Bi-Directional DIN Energy Meter, Modbus, Pulse Out
E51C3 Bi-Directional DIN Energy Meter, Modbus, Logging, Pulse Out
 

Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22, and H21 data loggers.

  • Measures Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more.
  • Range: 90-600VAC – Wye or Delta configurations
  • Accuracy: ANSI 12.20 0.5% accuracy, IEC 62053-22 Class 0.5S
  • Compatible with CTs from 5 to 32000A (333mV output)
  • Bright backlit LCD
  • UL listed, CE, California CSI Solar, ANSI C12.20

Environment:
The T-VER-E50B2 Sensor is for use in Indoor environments

Measurements:
The T-VER-E50B2 Sensor supports the following measurements:

AC Current, AC Voltage, Amp Hour (Ah), Amps (A), Kilowatt Hours (kWh), Kilowatts (kW)

AlphaOmega-Electronics es distribuidor Autorizado de Onset
en España desde hace más de 25 años.

                    Hobo Data Loggers - Onset Computer Corporation
Precisión de Medida:  
   Potencia Real y Energía IEC 62053-22 Class 0.5S, ANSI C12.20 0.5%
   Potencia Reactiva y Energía IEC 62053-23 Class 2, 2%
   Corriente 0.4% (+0.015% per °C deviation from 25°C) from 5% to 100% of range;
0.8% (+0.015% per °C deviation from 25°C) from 1% to 5% of range
   Voltaje 0.4% (+0.015% per °C deviation from 25°C) from 90V (L-N) to 600VAC (LL)
   Velocidad de Muestreo 2520 samples per second
   Data Update Rate 1 sec
   Type of Measurements True RMS up to the 21st harmonic 60 Hz, One to three phase AC system
Características Voltaje de Entrada:  
   Measured AC Voltage Minimum 90VL-N (156VL-L) for stated accuracy
UL Maximums: 600VL-L (347VL-N)
CE Maximums: 300VL-N (520V L-L)
   Metering Over Range +20%
   Impedance 2.5 MΩ (L-N)/5 MΩ (L-L)
   Frequency Range 45 to 65 Hz
Características Corriente de Entrada:  
   CT Scaling Primary: Adjustable from 5 A to 32,000 A
   Measurement Input Range 0 to 0.333VAC or 0 to 1.0VAC (+20% over-range)
   Impedance 10.6kΩ (1/3 V mode) or 32.1kΩ (1 V mode)
Salidas:  
   Alarm Contacts N.C., static output (30VAC/DC, 100mA max. @ 25°C, derate 0.56mA per °C above 25°C)
   Real/Reactive Energy
    Pulse Contacts
N.O., static output (30VAC/DC, 100mA max. @ 25°C,
derate 0.56mA per °C above 25°C)
Características Mecánicas:  
   Peso 0.62 lb (0.28 kg)
   IP Degree of Protection (IEC 60529) IP40 front display; IP20 Meter
   Display Characteristics Back-lit blue LCD
   Terminal Block Screw Torque 0.37 ft•lb (0.5 N•m) nominal/0.44 ft-lb (0.6 N•m) max
   Terminal Block Wire Size 26 to 14 AWG (0.13 to 2.08 mm2)
   Rail T35 (35mm) DIN Rail per EN50022
Características Ambientales:  
   Operating Temperature Meter: -30° to 70°C; Display: 0° to 50°C
   Storage Temperature Meter: -40° to 85°C; Display: -10° to 60°C
   Humidity Range <95% RH (non-condensing)
   Altitude of Operation 3 km max.
Categoría de Medidor:  
   North America CAT III; for distribution systems up to 347 V L-N/600VAC L-L
   CE CAT III; for distribution systems up to 300 V L-N
   Dielectric Withstand Per UL 508, EN61010
   Conducted and Radiated Emissions FCC part 15 Class B, EN55011/EN61000 Class B (residential and light industrial)
   Conducted and Radiated Immunity EN61000 Class A (heavy industrial)
Seguridad:  
   North America (cULus) UL508 (open type device)/CSA 22.2 No. 14-05
   Europe (CE) EN61010-1:2001

30 otros productos en la misma categoría: