FuelCell-Univ Estaciones de Prueba y Entrenamiento para Pilas de Combustible en Universidades

The University Test Station provides control of flow, temperature and pressure for the anode and cathode gases. The station incorporates a DC electronic load. The Station also includes two humidity bottles, an Operating Manual and a computer utilizing LabView-based software. The software is designed to gather and plot data for the I-V curves, life-cycle tests, and read an optional reference electrode. An optional AC-Impedance measurement system is available for applications requiring more than just DC testing. For further descriptions of individual items, see below.

University System Components

• AMREL Electronic Load (10 Volts at 50 Amps 60 Watts)
• Anode Mass Flow Controller at 500 sccm
• Cathode Mass Flow Controller at 2000 sccm
• Type 316 Stainless Steel University Humidification Bottle w/Internal Nafion Tubing (qty. 2)
• Anode and Cathode Pre-Heaters Emergency Shut Down Switch
• 5 cm2 Single Cell Hardware Assembly
• Operating Manual

Desktop Computer System includes:

• Current Processor and Hard Drive, Read-Write CD/DVD Drive, Keyboard, Mouse, 20-22-inch flat-screen LCD monitor, National Instr. PCI-GPIB card, RS-485 to RS-232 Converter, Current Windows Operating System, LabView-based Control System

Optional Components

• AC Impedance
• Reference Electrode

Optional AC Impedance System